Installation Instructions

Provides the best mechanical means of controlling a door. The weight of the door is supported by the bottom arm, which is directly connected to the door spindle. The direct connection between the bottom arm and the floor closer spindle creates a tremendous increase in closing efficiency compared to surface or overhead concelead closers.

Application 

• Single Acting, Right Handed
• Exterior or Interior Doors 
• Weight to 450 lbs.
• Door Width up to 4'0" (1219mm)

Product Description & Features

• Built-in positive dead stop prevents door from swinging beyond the desired opening degree (specify 85°, 90°, 95°, 105°) 
• Separate and independent valves for closing speed, latch speed and backcheck  
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”. (For 8-1/2 lbs. of opening force prefix PH and suffix 8-1/2 lbs.) 
• Cold weather fluid available – specify “CWF” (not available for closers with “DA”) 
• Sealed closer option – specify “SC”  
• Cycolac, rust-proof cement case 
• Vertical door adjustment 
• Standard top pivot: #180 included 
• For arch top doors or applications when the 180 top pivot cannot be used, supply at least two each M190 load-bearing intermediate pivots, mounted together at the top of the straight vertical edge 
• Intermediate pivot(s) required: M19 (order separately)
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot 
• For 20-minute labeled doors suffix "-20" to the part number 
• Furnished with wood and machine screws 

Pivot Type: Offset